25th CAB instructs KAW soldiers on ground mechanics

| July 24, 2012 | 0 Comments
Col. Frank Tate (second from left), commander, 25th CAB, 25th ID, presents a Certificate of Completion to a soldier with Logistics Kandak, KAW, during the Level 3 Ground Maintenance Certification Course graduation for wheeled vehicle mechanics, held at Kandahar Airfield, Afghanistan, July 9.

Col. Frank Tate (second from left), commander, 25th CAB, 25th ID, presents a Certificate of Completion to a soldier with Logistics Kandak, KAW, during the Level 3 Ground Maintenance Certification Course graduation for wheeled vehicle mechanics, held at Kandahar Airfield, Afghanistan, July 9.

Story and Photo by
Sgt. Daniel Schroeder
25th Combat Aviation Brigade Public Affairs, 25th Infantry Division

KANDAHAR AIRFIELD, Afghanistan – Eleven soldiers from the Logistics Kandak, Kandahar Air Wing, or KAW, graduated from the first Level 3 Ground Maintenance Certification Course, here, July 9.

Wheeled vehicle mechanics from Headquarters Support Company, 209th Aviation Support Battalion, 25th Combat Aviation Brigade, 25th Infantry Division, instructed the KAW soldiers on NATO and Afghan criteria for entry-level wheeled vehicle mechanics.

“This class was good for the motor skills of the soldiers, noncommissioned officers and officers,” said Capt. Abdul Qahar, maintenance officer for the transportation section of the KAW.

“We now have the ability to fix the Rangers, Internationals, High Mobility Multipurpose Wheeled Vehicle, or HHMWVs, and Light Medium Tactical Vehicle, or LMTVs, on a mission if something were to happen,” Qahar added.

Before the KAW soldiers learned how to repair the vehicles, they received instruction on maintenance safety.

“We taught them to remove any watches, rings, loose fitting clothing and anything that could be snagged while working on a vehicle,” said Spc. Dennis Spiller, assistant instructor and wheeled vehicle mechanic, HSC, 209th ASB, 25th CAB.

“We also instructed them on the proper protective gear to wear during maintenance. If you are not safe, you can get hurt and not be able to do your job,” Spiller added.

Along with safety, other areas covered included replacing basic parts on the engine and transmission, and troubleshooting procedures for maintenance and electrical issues.

“(Afghan mechanics) picked up on the training quickly,” Spiller said. “They showed an eagerness to learn about their vehicles and understood the process of troubleshooting swiftly.”

The KAW soldiers were shown piece by piece what a disassembled engine looks like and replaced worn parts, such as alternators and air conditioning units, on their vehicles. They were also taught how to fill out a Ministry of Defense Roster 63, a form that is used to identify faults on a vehicle before it is turned in for maintenance.

“I am happy that my soldiers and NCOs have received this important training because now they have the ability to fix the vehicle if repairs are needed while on a mission,” Qahar said. “Also, I do not have to worry about the safety of my soldiers during maintenance. I look forward to continuing the training with our advisors.”

Tags: , ,

Category: Deployed Forces, News, Training

Leave a Reply

Your email address will not be published. Required fields are marked *